DALI LED repeater and DEYA DA-PD power supply

• DALI repeater with integrated power supply, designed to amplify and transmit DALI signals between master and slave control lines.

Main advantages:

• Amplification and bidirectional transmission of DALI signals.
• DALI commands from any controller are transmitted to all DALI lines.
• Electrical isolation between the master and slave control circuits.
• A star or cascade network topology is possible; one master controller is sufficient.
• When used with a single master controller, a star network with multiple repeaters can be created.
• Cascade circuit with the ability to connect up to 3 repeaters in series.
• Allows you to increase the length of the DALI line from 300 to 1200 meters.
• Maximum output current 200 mA to power the entire DALI line.
• Does not increase the maximum number of DALI devices: maximum 64 devices in the total network (master + slave lines), devices can be freely distributed across slave circuits.
• An additional DALI power supply is not required for each slave circuit.

Technical specifications:

• Input voltage: 100–240 VAC;
• Mains frequency: 50/60 Hz;
• Input current: 0.1 A;
• Output current: maximum 200 mA;
• Input/output signal: DALI;
• Operating temperature: -20 °C ~ +55 °C;
• Protection: short circuit
• Size: 120×78×55 millimeters;
• Weight: 0.133 kilograms;
• Safety standards: EN 61347-1/-2;
• EMC: EN IEC 55015; EN IEC 61547; ETSI EN 301 489-1/-3;
• Certification: CE, RoHS.