|
Quantity
|
Cost
|
||
|
|
|||
Flexible Neon and LED Strip for a Sauna: How to Choose Heat-Resistant Lighting
A sauna needs LED strip or flexible neon designed for the conditions of the specific zone. An IP65 label or silicone housing alone is not enough: IP protects against dust and water, but does not confirm heat resistance. In a steam room, use only a model with a working temperature range confirmed by the manufacturer.
Short answer: use LED strip in an aluminum profile or flexible neon in a changing room. A washroom needs a moisture-resistant model and sealed connections. A hot steam room requires dedicated heat-resistant lighting, with the power supply and controller installed outside the hot zone.
What to choose for each zone
| Zone | Recommendation |
|---|---|
| Changing room | LED strip in a profile or decorative neon. |
| Washroom / shower | Moisture-resistant model with sealed connections. |
| Steam room | Only a product with a confirmed temperature range. |
LED strip provides more light and dissipates heat better in an aluminum profile. Flexible neon creates an even line without visible diode dots and suits contour lighting. Both products must match the conditions of the zone.
How to check the product
Find the operating temperature range in the technical specifications, assess the conditions at the mounting point, choose the appropriate IP rating and check the compatibility of the housing, adhesive, end caps and connectors.
How to install the lighting
Use a 12V or 24V system according to the model specifications, place the power supply in a dry location, keep the lighting away from the heater, use heat-resistant clips or a profile, and seal the ends.
Frequently asked question
Can a standard LED strip be installed in a steam room?
Only if the manufacturer explicitly confirms the permitted temperature for that mounting point. IP65 alone is not enough.
Conclusion
A changing room can use a standard solution, a washroom needs sealed connections, and a steam room requires dedicated heat-resistant lighting. The reliable setup is low voltage, a power supply outside the hot zone, heat-resistant mounting and sealed ends.
ARTLED can help you choose lighting and accessories for your sauna.